The new Omnidesk Node Series sit-stand desk runs power through the inside of the leg, keeping your setup neater and safer. No dangling cords, no tangle of cables chasing the desk up and down, and no extra trays to screw on underneath.
It sounds like a small detail. But anyone who has owned a standing desk knows cables are the part that never quite looks right. Here's why we built power into the leg, and what it means for your workspace.
The problem with standing desk cables
On a fixed desk, you can route cables once and forget about them. A sit-stand desk is different. Every time it rises or lowers, the power cord has to travel with it.
The traditional fix is a mix of add-ons: cable trays, adhesive clips, zip ties and a fabric or plastic spine running to the floor. They help, but they come with trade-offs:
- Loose loops of cord hang below the desktop so there's enough slack for standing height.
- Snags and strain happen when a cord catches on a drawer, chair or wall as the desk moves.
- Trip hazards form where the cord runs across the floor to the wall socket.
- Visual clutter undoes the clean look you bought the desk for, especially in open-plan offices where the back of the desk is on show.
How the Node Series concealed power system works
The Node Series takes the cable off the outside of the desk and puts it inside the frame. Power runs up through the inside of the desk leg, so the leg itself does the job a cable spine or tray normally would.
The result is a desk where the power path is part of the design rather than something you add afterwards. Because the cable is enclosed in the leg, it moves with the frame as you switch between sitting and standing, without loose slack swinging underneath.
Why in-leg power is better
A neater desk from every angle. With no cords hanging from the desktop, the Node Series looks as clean from behind as it does from your chair. That matters in home offices where the desk faces into the room, and in workplaces where desks sit back to back.
A safer workspace. Enclosing the cable inside the leg keeps it away from feet, chair castors and vacuum cleaners. Fewer exposed cords means fewer trip hazards and less chance of a cable being pinched or damaged.
Smoother height changes. Loose cords can catch or pull taut as a desk rises. Running power through the leg keeps the cable path controlled, so adjusting height is just a press of a button.
Less to install and maintain. There's no separate cable spine to fit and no clips that loosen over time. Setup is simpler and the desk stays tidy without ongoing re-routing.
More than hidden power
Best-in-class clip-together assembly. The Node Series frame clips together, so setup is quick and straightforward. You spend less time with instructions and tools and more time at your new desk.
Rock-solid stability. Hiding the cables would mean little if the desk wobbled. The Node Series is engineered to stay steady at both sitting and standing height, so your monitor, keyboard and coffee stay put while you work.
Your choice of power routing. In-leg power is there when you want the cleanest setup, but it isn't the only option. You can also run power the traditional way, outside the leg. That flexibility suits commercial fitouts, where desks often connect to existing floor boxes, power rails or under-desk cable management that is already part of the office design.
Who the Node Series suits
- Home offices, where the desk often sits in a living space and a tidy look matters.
- Corporate and open-plan offices, where many desks side by side multiply the cable clutter and safety risk.
- Shared and hot-desk spaces, where different people adjust the height all day and loose cords take the most wear.
- Anyone who's tired of cable management, and would rather the desk handle it out of the box.
Frequently asked questions
Does the Omnidesk Node Series have hidden cables?
Yes. The Node Series runs power through the inside of the desk leg, so cords stay hidden and don't hang down as the desk moves between sitting and standing.
What is integrated power on a standing desk?
Integrated or concealed power means the power cable is built into the desk frame instead of running loose underneath. On the Node Series, the cable travels inside the leg.
Why is in-leg cable routing safer?
Exposed cords on a sit-stand desk can snag, stretch or become a trip hazard. Enclosing the cable in the leg protects it and keeps it off the floor and away from feet and chairs.
Do I still need a cable tray or cable spine?
The in-leg power path replaces the cable spine you'd normally use to get power from the floor to the desk. If you'd prefer, power can also be run the traditional way, outside the leg. This can suit commercial fitouts that already have their own cable management.
A cleaner way to stand and work
A standing desk should make your day better, not add another mess to manage. By running power through the inside of the leg, the Omnidesk Node Series gives you a sit-stand desk that looks cleaner, feels safer and moves freely.
Shop Node in our Standing Desks collection by clicking here.